{"id":2612,"date":"2026-09-15T07:56:33","date_gmt":"2026-09-15T07:56:33","guid":{"rendered":"https:\/\/gushidiamondtools.com\/?post_type=product&p=2612"},"modified":"2026-09-15T07:59:27","modified_gmt":"2026-09-15T07:59:27","slug":"new-design-diamond-saw-blade","status":"publish","type":"product","link":"https:\/\/gushidiamondtools.com\/es\/product\/new-design-diamond-saw-blade\/","title":{"rendered":"Nueva hoja de sierra de diamante de dise\u00f1o innovador"},"content":{"rendered":"
\n
\n
\n
\n

Product Overview<\/h2>\n

The GUSHI XLD New Design Turbo Diamond Saw Blade is a general-purpose construction and stone blade whose turbo rim is fitted with circular protective segments. These protective segments shield the steel core from undercutting and side wear, so the blade holds its true diameter and running shape far longer than a standard turbo blade. The XLD series spans 10 diameters from 4″ (105mm) to 14″ (350mm) with 8mm segment height and 20\/22.23\/25.4mm arbors, cold-pressed for fast cutting of granite, marble, concrete, brick and masonry. It is manufactured by Huzhou Gu’s Imp. & Exp. Co., Ltd. (founded 2004, ISO 9001:2015, CE \/ MPA \/ EN13236 certified) with an OEM MOQ of 500 pieces.<\/p>\n

The defining feature is the new-design rim. On a conventional turbo blade the core is exposed between the cutting segments; as the blade cuts abrasive material, the core gradually wears away (undercutting) until it becomes too thin and the blade must be retired. The XLD adds circular protective segments \u2014 wear bars that sit proud of the core and take that abrasion instead. The cutting segments do the work; the protective segments preserve the blade.<\/p>\n

The blade is built on the same 65Mn spring steel core platform as the rest of the GUSHI range \u2014 laser stress-relieved, computer-balanced and EN13236 burst-speed tested. Where the thin HHPST and THPST turbo blades are tuned for chip-free cutting of fragile tile, porcelain and sintered stone, the XLD is the heavier workhorse for tough building materials where blade longevity and core protection matter more than a hairline-clean edge.<\/p>\n

For distributors, the XLD is a high-volume staple SKU: a broad 4″\u201314″ range covering grinders through masonry saws, a clear durability story (more cuts per blade), and OEM support with branded packaging. GUSHI backs it with the same anti-dumping-case pedigree and 20+ country export record as the rest of the line.<\/p>\n<\/div>\n

\n

Full Specifications<\/h2>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Parameter<\/th>\nSpecification<\/th>\n<\/tr>\n
Product Type<\/td>\nTurbo diamond saw blade with circular protective segments (new design)<\/td>\n<\/tr>\n
Series \/ Model<\/td>\nXLD series \u2014 XLD1504 to XLD1514 (10 sizes)<\/td>\n<\/tr>\n
Available Diameters<\/td>\n4″ (105mm), 4.5″ (115mm), 5″ (125mm), 6″ (150mm), 7″ (180mm), 8″ (200mm), 9″ (230mm), 10″ (250mm), 12″ (300mm), 14″ (350mm)<\/td>\n<\/tr>\n
Segment Height<\/td>\n8mm<\/td>\n<\/tr>\n
Segment Width (kerf)<\/td>\n2.0mm (4″), 2.2mm (4.5″\u20136″), 2.6mm (7″\u20138″), 3.0mm (9″), 3.2mm (10″\u201314″)<\/td>\n<\/tr>\n
Arbor Size<\/td>\n20 \/ 22.23mm (4″\u20139″), 20 \/ 25.4mm (10″\u201314″)<\/td>\n<\/tr>\n
Technology<\/td>\nCold-pressed (hot-pressed \/ laser-welded options available)<\/td>\n<\/tr>\n
Diamond Grit<\/td>\nHigh-quality industrial diamond, concentration tuned to stone & concrete<\/td>\n<\/tr>\n
Bond Type<\/td>\nMetal bond \u2014 cobalt-nickel matrix, general-purpose tuned<\/td>\n<\/tr>\n
Core Material<\/td>\n65Mn spring steel, laser stress-relieved, with protective segments<\/td>\n<\/tr>\n
Runout Tolerance<\/td>\n\u2264 0.1mm (computer-balanced)<\/td>\n<\/tr>\n
Cutting Method<\/td>\nDry or wet; wet recommended for granite, marble & long concrete cuts<\/td>\n<\/tr>\n
Suitable Materials<\/td>\nGranite, marble, concrete, brick, masonry, paver & other building materials<\/td>\n<\/tr>\n
Standards & Certifications<\/td>\nISO 9001:2015, CE, MPA, EN13236, SGS; RoHS available<\/td>\n<\/tr>\n
Blade Color<\/td>\nAny color per OEM request<\/td>\n<\/tr>\n
Packaging<\/td>\nSingle sleeve, blister card, retail box or bulk carton<\/td>\n<\/tr>\n
OEM MOQ<\/td>\n500 pieces per size (mixed sizes negotiable)<\/td>\n<\/tr>\n
Sample Policy<\/td>\nAvailable at cost price + shipping<\/td>\n<\/tr>\n
Payment Terms<\/td>\nL\/C, T\/T, Western Union, PayPal<\/td>\n<\/tr>\n
Port of Loading<\/td>\nShanghai or Ningbo, China<\/td>\n<\/tr>\n
Lead Time<\/td>\n20\u201330 days after deposit<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n
\n

How the Protective-Segment Design Works<\/h2>\n

1. Circular Protective Segments Guard the Core<\/h3>\n

Between the cutting segments sit circular protective (gear\/guard) segments that stand proud of the steel core. As the blade spins through abrasive concrete or stone, these protective segments take the sideways wear that would otherwise eat into the core. The core stays full thickness, so the blade keeps cutting true instead of wandering as the centre thins.<\/p>\n

2. Turbo Rim Cuts Fast Through Hard, Abrasive Material<\/h3>\n

The turbo profile adds cutting edge and clears slurry and dust through the cut, so the blade advances fast in granite, concrete and brick without bogging down. The 8mm segment height gives a long service window before the diamond is spent.<\/p>\n

3. Balanced Steel Core for Stability on Deep Cuts<\/h3>\n

The 65Mn core is laser stress-relieved and computer-balanced to a 0.1mm runout tolerance. Combined with the protective segments, the blade runs stable even on the deep, demanding cuts that normally flex and destroy a standard core \u2014 a key reason it lasts longer on the job.<\/p>\n<\/div>\n

\n

Key Features Explained<\/h2>\n

Protective Segments = More Cuts Per Blade<\/h3>\n

Undercutting is the silent killer of ordinary turbo blades. The XLD’s protective segments absorb that wear, so the blade holds its diameter and structural integrity for far longer. On abrasive jobs (concrete, block, brick) this translates directly into fewer blade changes and lower cost per cut.<\/p>\n

General-Purpose Range, 4″ to 14″<\/h3>\n

Ten diameters cover everything from an angle grinder on a 4″ blade to a 14″ masonry saw. One product family serves tile shops, stone fabricators and construction sites, simplifying inventory and ordering for distributors.<\/p>\n

8mm Segment Height for Long Life<\/h3>\n

The 8mm segment height gives a generous diamond window. More diamond height means more cuts before the blade is spent \u2014 a direct lever on cost per cut in high-volume stone and concrete work.<\/p>\n

Dry or Wet \u2014 Works Where You Need It<\/h3>\n

The blade is rated for dry cutting (ideal on site and for masonry without water) and wet cutting (recommended for granite, marble and long concrete cuts to keep segments cool and control dust). A light water spray is enough to extend segment life without a full wet table.<\/p>\n

Certified, Trade-Case Backed Manufacturer<\/h3>\n

GUSHI is ISO 9001:2015 certified with CE, MPA, EN13236 and SGS references, and ships under a competitive 6.2% U.S. anti-dumping duty rate from its successful trade-case defense. Distributors get a credible, compliant supply story.<\/p>\n<\/div>\n

\n

Size Selection Guide (XLD Series)<\/h2>\n

Choose the diameter by machine and material. Max RPM figures are reference values (~80 m\/s peripheral-speed calculation, the standard basis for diamond-blade ratings); always verify against the RPM marked on your specific blade and the machine’s no-load speed.<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Item No.<\/th>\nDiameter (inch\/mm)<\/th>\nSegment Width (mm)<\/th>\nSegment Height (mm)<\/th>\nArbor Hole (mm)<\/th>\nMax RPM (ref.)<\/th>\n<\/tr>\n
XLD1504<\/td>\n4″ \/ 105<\/td>\n2.0<\/td>\n8<\/td>\n20 \/ 22.23<\/td>\n14,600<\/td>\n<\/tr>\n
XLD1545<\/td>\n4.5″ \/ 115<\/td>\n2.2<\/td>\n8<\/td>\n20 \/ 22.23<\/td>\n13,300<\/td>\n<\/tr>\n
XLD1505<\/td>\n5″ \/ 125<\/td>\n2.2<\/td>\n8<\/td>\n20 \/ 22.23<\/td>\n12,200<\/td>\n<\/tr>\n
XLD1506<\/td>\n6″ \/ 150<\/td>\n2.4<\/td>\n8<\/td>\n20 \/ 22.23<\/td>\n10,200<\/td>\n<\/tr>\n
XLD1507<\/td>\n7″ \/ 180<\/td>\n2.6<\/td>\n8<\/td>\n20 \/ 22.23<\/td>\n8,500<\/td>\n<\/tr>\n
XLD1508<\/td>\n8″ \/ 200<\/td>\n2.6<\/td>\n8<\/td>\n20 \/ 22.23<\/td>\n7,600<\/td>\n<\/tr>\n
XLD1509<\/td>\n9″ \/ 230<\/td>\n3.0<\/td>\n8<\/td>\n20 \/ 22.23<\/td>\n6,600<\/td>\n<\/tr>\n
XLD1510<\/td>\n10″ \/ 250<\/td>\n3.2<\/td>\n8<\/td>\n20 \/ 25.4<\/td>\n6,100<\/td>\n<\/tr>\n
XLD1512<\/td>\n12″ \/ 300<\/td>\n3.2<\/td>\n8<\/td>\n20 \/ 25.4<\/td>\n5,100<\/td>\n<\/tr>\n
XLD1514<\/td>\n14″ \/ 350<\/td>\n3.2<\/td>\n8<\/td>\n20 \/ 25.4<\/td>\n4,400<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
Pro Tip:<\/strong>\u00a0Use the 4″\u20139″ sizes on angle grinders and hand saws for on-site cutting of brick, block and granite; step up to 10″\u201314″ on a masonry or table saw for slab and paver work. For granite and marble, cut wet to keep the segments cool and maximise life.<\/div>\n<\/div>\n
\n

Applications & Suitable Materials<\/h2>\n

Typical Applications<\/h3>\n\n\n\n\n\n\n\n\n\n\n
Application<\/th>\nRecommended Size<\/th>\nNotes<\/th>\n<\/tr>\n
Granite & marble cutting<\/td>\n4″\u201314″ XLD<\/td>\nGeneral fabrication; wet recommended<\/td>\n<\/tr>\n
Concrete cutting<\/td>\n7″\u201314″ XLD<\/td>\nProtective segments resist abrasive wear<\/td>\n<\/tr>\n
Brick & block \/ masonry<\/td>\n4″\u20139″ XLD<\/td>\nDry cutting common on site<\/td>\n<\/tr>\n
Paver & tile (hard)<\/td>\n4″\u20137″ XLD<\/td>\nUse on tougher, non-chip-prone materials<\/td>\n<\/tr>\n
Construction site trimming<\/td>\n4.5″\u20139″ XLD<\/td>\nGrinder-mounted, dry or wet<\/td>\n<\/tr>\n
Slab & countertop (rough)<\/td>\n10″\u201314″ XLD<\/td>\nMasonry\/table saw; not for finished edges<\/td>\n<\/tr>\n
General building material<\/td>\nFull range<\/td>\nOne family for most stone & masonry<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Suitable Materials<\/h3>\n\n\n\n\n\n\n\n\n\n\n
Material<\/th>\nCutting Performance<\/th>\nNotes<\/th>\n<\/tr>\n
Granite<\/td>\nExcellent<\/td>\nWet cutting recommended for life<\/td>\n<\/tr>\n
Marble<\/td>\nExcellent<\/td>\nSmooth, fast cutting<\/td>\n<\/tr>\n
Concrete<\/td>\nExcellent<\/td>\nProtective segments extend life<\/td>\n<\/tr>\n
Brick \/ block \/ masonry<\/td>\nExcellent<\/td>\nDry cutting common on site<\/td>\n<\/tr>\n
Hard paver \/ tile<\/td>\nGood<\/td>\nFor chip-prone tile use thin turbo blade<\/td>\n<\/tr>\n
Porcelain \/ sintered stone<\/td>\nNot recommended<\/td>\nUse HHPST \/ THPST thin turbo blades<\/td>\n<\/tr>\n
Steel, wood, glass<\/td>\nNot recommended<\/td>\nUse a dedicated metal or glass blade<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n
\n

New-Design XLD vs. Standard Turbo Blade<\/h2>\n

A standard turbo blade works, but its exposed core wears away on abrasive jobs. The XLD new-design blade adds protective segments to solve exactly that. Here is the comparison:<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Dimension<\/th>\nGUSHI XLD New-Design Blade<\/th>\nStandard Turbo Blade<\/th>\n<\/tr>\n
Core protection<\/td>\nCircular protective segments stop undercutting<\/td>\nExposed core wears away<\/td>\n<\/tr>\n
Blade life on abrasive material<\/td>\nLonger \u2014 holds diameter & shape<\/td>\nShorter \u2014 core thins out<\/td>\n<\/tr>\n
Cuts per blade<\/td>\nMore \u2014 lower cost per cut<\/td>\nFewer<\/td>\n<\/tr>\n
Size range<\/td>\n4″\u201314″ (10 sizes)<\/td>\nOften 4″\u20139″<\/td>\n<\/tr>\n
Target materials<\/td>\nGranite, marble, concrete, brick, masonry<\/td>\nGeneral, lighter use<\/td>\n<\/tr>\n
Segment height<\/td>\n8mm<\/td>\nVaries, often thinner<\/td>\n<\/tr>\n
Dry & wet use<\/td>\nBoth supported<\/td>\nBoth supported<\/td>\n<\/tr>\n
Runout \/ balance<\/td>\n\u22640.1mm, computer-balanced<\/td>\nVaries<\/td>\n<\/tr>\n
Best for<\/td>\nConstruction, stone shops, high-volume cutting<\/td>\nLight DIY \/ occasional use<\/td>\n<\/tr>\n
Initial cost per blade<\/td>\nUS$0.76\u201320.00<\/td>\nUS$0.50\u201312.00 (general)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Bottom line:<\/strong>\u00a0On abrasive jobs the XLD pays back through more cuts per blade and fewer core failures \u2014 the savings come from durability, not just the sticker price. For chip-free tile and porcelain, pair it with the HHPST \/ THPST thin turbo blades instead.<\/p>\n<\/div>\n

\n

How to Use: Step-by-Step Guide<\/h2>\n
    \n
  1. Inspect the blade for cracks, missing segments or damaged protective segments \u2014 never mount a damaged blade.<\/li>\n
  2. Confirm the blade’s marked max RPM is equal to or higher than your grinder, circular or masonry saw’s no-load speed.<\/li>\n
  3. Clean the arbor and flanges; mount the blade with the correct bushing and rotation direction (logo facing out).<\/li>\n
  4. Tighten the spindle nut to the manufacturer’s torque spec with the wrench \u2014 never hand-tighten.<\/li>\n
  5. Run a 60-second test at full speed clear of the workpiece; listen for vibration or wobble.<\/li>\n
  6. Mark a guide line; let the blade reach full speed, then feed gently into the material \u2014 do not force it.<\/li>\n
  7. Use a steady push; the turbo rim cuts best with consistent pressure, not heavy force.<\/li>\n
  8. For granite, marble or long concrete cuts, use a wet saw or light water spray and keep the rim cool.<\/li>\n
  9. On brick, block and masonry, dry cutting is fine \u2014 but wear a respirator for silica dust.<\/li>\n
  10. Stop immediately if you see blue discoloration or smell burning \u2014 the bond is wrong or the feed is too aggressive.<\/li>\n
  11. Never twist the blade in the kerf or side-load it; keep the cut square to the material.<\/li>\n
  12. After use, spin down fully, inspect segments and protective bars, and store the blade flat in a dry place.<\/li>\n<\/ol>\n
    Safety:<\/strong>\u00a0Always use the blade guard and full PPE (eye, ear, respiratory for silica\/concrete dust). The turbo rim is precise but brittle \u2014 avoid dropping the blade or striking the rim, and replace it when segments wear to 1\u20132mm above the core.<\/div>\n

    For more guidance, see our related guides on\u00a0super thin turbo saw blades<\/a>,\u00a0choosing the right diamond saw blade<\/a>, and\u00a0diamond cup wheels for edge grinding<\/a>.<\/p>\n<\/div>\n

    \n

    Preguntas frecuentes<\/h2>\n
    \n

    What is the ‘new design’ on this turbo diamond saw blade?<\/h3>\n

    The new design is a turbo rim fitted with circular protective segments (also called gear or guard segments) between the cutting segments. These protective segments sit proud of the core and shield the steel core from undercutting and side wear, especially during deep cuts in hard, abrasive materials like concrete and granite. The result is a blade that keeps its true running shape longer and resists the core deformation that ends a normal blade’s life.<\/p>\n<\/div>\n

    \n

    What materials can the XLD new-design blade cut?<\/h3>\n

    The XLD series is a general-purpose construction and stone blade for granite, marble, concrete, brick, masonry and other building materials. It is the workhorse blade of the GUSHI range \u2014 broader and tougher than the thin turbo blades used for tile and porcelain. It is not intended for steel, wood or glass; for metal use a dedicated diamond metal-cutting wheel.<\/p>\n<\/div>\n

    \n

    What sizes of GUSHI XLD new-design blades are available?<\/h3>\n

    The XLD series spans 10 diameters from 4″ (105mm) up to 14″ (350mm): 4″, 4.5″, 5″, 6″, 7″, 8″, 9″, 10″, 12″ and 14″. Segment height is 8mm, and arbors are 20\/22.23mm on the smaller sizes and 20\/25.4mm on the 10″\u201314″ sizes to fit angle grinders, circular saws and masonry saws.<\/p>\n<\/div>\n

    \n

    Can the new-design blade be used dry or wet?<\/h3>\n

    Yes \u2014 the XLD blade is rated for both dry and wet cutting. Dry cutting is common on site for brick, block and masonry; wet cutting (or a light water spray) is recommended for granite, marble and long concrete cuts to keep the segments cool, control dust and extend blade life. The blade is explicitly listed for dry or wet use.<\/p>\n<\/div>\n

    \n

    How do protective segments extend blade life?<\/h3>\n

    On a standard turbo blade, the steel core is exposed between segments and gradually wears away (undercutting) as the blade cuts \u2014 eventually the core becomes too thin and the blade must be retired. The circular protective segments on the XLD act as wear bars that take that abrasion instead of the core, so the blade holds its diameter and structural integrity far longer and delivers more cuts per blade.<\/p>\n<\/div>\n

    \n

    Is the XLD blade different from a thin turbo tile blade?<\/h3>\n

    Yes. The HHPST and THPST thin turbo blades are engineered for chip-free cutting of tile, porcelain and sintered stone (Dekton\/Neolith) with a narrow 1.0-1.6mm rim. The XLD new-design blade is a heavier general-purpose construction blade with a wider, protective-segmented turbo rim built for granite, concrete and brick. Choose the thin turbo for fragile, chip-prone surfaces; choose the XLD for tough building materials.<\/p>\n<\/div>\n

    \n

    What is the manufacturing process and quality of the XLD blade?<\/h3>\n

    The XLD blade is cold-pressed (with hot-pressed and laser-welded options available) and built on a 65Mn spring steel core that is laser stress-relieved and computer-balanced to a 0.1mm runout tolerance. GUSHI is ISO 9001:2015 certified and the blade carries CE, EN13236, MPA and SGS references, with a 6.2% U.S. anti-dumping duty rate from the company’s successful trade-case defense.<\/p>\n<\/div>\n

    \n

    What is the OEM MOQ and customization for XLD new-design blades?<\/h3>\n

    The standard OEM MOQ is 500 pieces per size. GUSHI offers private labeling, custom blade color, packaging (sleeve, blister card or retail box), segment bonds tuned to local stone and concrete, and arbor sizing. Mixed-size orders are negotiable, samples are available at cost price plus shipping, and bulk lead time is 20-30 days after deposit.<\/p>\n<\/div>\n<\/div>\n

    \n

    OEM & Wholesale Information<\/h2>\n\n\n\n\n\n\n\n\n\n\n\n
    Parameter<\/th>\nDetail<\/th>\n<\/tr>\n
    MOQ (diamond tools)<\/td>\n500 pieces per size<\/td>\n<\/tr>\n
    Sample policy<\/td>\nAvailable at cost price + buyer pays shipping<\/td>\n<\/tr>\n
    Customization<\/td>\nLogo (printed \/ laser-etched), blade color, packaging, segment bond, arbor size, protective-segment design<\/td>\n<\/tr>\n
    Private label<\/td>\nYes \u2014 GUSHI also builds blades for distributor brands<\/td>\n<\/tr>\n
    Payment terms<\/td>\nL\/C, T\/T, Western Union, PayPal<\/td>\n<\/tr>\n
    Port of loading<\/td>\nShanghai or Ningbo, China<\/td>\n<\/tr>\n
    Production capacity<\/td>\n1,000,000 sets \/ month<\/td>\n<\/tr>\n
    Languages<\/td>\nEnglish, Spanish, Japanese, Russian, French, German<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

    Huzhou Gu’s Imp. & Exp. Co., Ltd. has manufactured and exported diamond tools since 2004. The company is one of 23 Chinese manufacturers that won the U.S. anti-dumping case for diamond blades (exporting under a competitive 6.2% duty), and counts distributors in the USA, Canada, Germany, UK, Netherlands, Italy, Portugal, Poland, Czech Republic, Brazil, Chile, Australia and South Africa among its customers \u2014 many for more than 10 years. Every 10 pieces of Chinese diamond blades exported to Brazil, 2 come from GUSHI.<\/p>\n

    Explore our complete range:\u00a0Diamond Saw Blades<\/a>,\u00a0Super Thin Turbo Saw Blades<\/a>, and\u00a0Dry Cutting Diamond Blades<\/a>.<\/p>\n

    WhatsApp: +86 133 2582 1813<\/a><\/strong><\/div>\n<\/div>\n<\/div>\n<\/div>","protected":false},"excerpt":{"rendered":"

    Product Overview The GUSHI XLD New Design Turbo Diamond Saw Blade is a general-purpose construction and stone blade whose turbo rim is fitted with circular protective segments. These protective segments shield the steel core from undercutting and side wear, so the blade holds its true diameter and running shape far longer than a standard turbo […]<\/p>\n","protected":false},"featured_media":2613,"template":"","meta":{"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","ast-disable-related-posts":"","theme-transparent-header-meta":"default","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}}},"product_brand":[],"product_cat":[25,792,782,783],"product_tag":[868,861,863,869,862,867],"class_list":["post-2612","product","type-product","status-publish","has-post-thumbnail","product_cat-cutting-tools","product_cat-diamond-saw-blade","product_cat-roycel-tiling-tools-supply","product_cat-tile-cutting-tools","product_tag-dekton-turbo-diamond-blade","product_tag-diamond-saw-blade","product_tag-mesh-saw-blade","product_tag-new-design-diamond-saw-blade","product_tag-super-thin-blades","product_tag-turbo-saw-blade","desktop-align-left","tablet-align-left","mobile-align-left","first","instock","shipping-taxable","product-type-simple"],"spectra_blocks_featured_image_url":{"thumbnail":{"url":"https:\/\/gushidiamondtools.com\/wp-content\/uploads\/2026\/09\/New-Design-Diamond-Saw-Blade-150x150.png","width":150,"height":150},"medium":{"url":"https:\/\/gushidiamondtools.com\/wp-content\/uploads\/2026\/09\/New-Design-Diamond-Saw-Blade-300x300.png","width":300,"height":300},"medium_large":{"url":"https:\/\/gushidiamondtools.com\/wp-content\/uploads\/2026\/09\/New-Design-Diamond-Saw-Blade-768x768.png","width":768,"height":768},"large":{"url":"https:\/\/gushidiamondtools.com\/wp-content\/uploads\/2026\/09\/New-Design-Diamond-Saw-Blade.png","width":1000,"height":1000},"full":{"url":"https:\/\/gushidiamondtools.com\/wp-content\/uploads\/2026\/09\/New-Design-Diamond-Saw-Blade.png","width":1000,"height":1000}},"spectra_blocks_author_info":{"display_name":"yunonailart@gmail.com","avatar_url":"https:\/\/secure.gravatar.com\/avatar\/453105e67af84cef528bd524239c72646969d5ee466e9e13b6ceb505d9edd85b?s=96&d=mm&r=g","author_link":"https:\/\/gushidiamondtools.com\/es\/author\/yunonailartgmail-com\/","description":""},"_links":{"self":[{"href":"https:\/\/gushidiamondtools.com\/es\/wp-json\/wp\/v2\/product\/2612","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/gushidiamondtools.com\/es\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/gushidiamondtools.com\/es\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/gushidiamondtools.com\/es\/wp-json\/wp\/v2\/media\/2613"}],"wp:attachment":[{"href":"https:\/\/gushidiamondtools.com\/es\/wp-json\/wp\/v2\/media?parent=2612"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/gushidiamondtools.com\/es\/wp-json\/wp\/v2\/product_brand?post=2612"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/gushidiamondtools.com\/es\/wp-json\/wp\/v2\/product_cat?post=2612"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/gushidiamondtools.com\/es\/wp-json\/wp\/v2\/product_tag?post=2612"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}